Information
Gallery
Services
- Wheel balancing
- Mot tests
- Tyre fitting
- Servicing all makes and models of motorcycle and scooter
- Engine rebuilds
- Insurance work ( approved) repairer
- Alloy welding
- mig welding
- Engineering / fabrication
- Genuine and pattern parts supplied and fitted most makes of bikes or scooter
- Bike pickup and delivery service
Degreeing your Cams
To Degree Cams:
Install degree wheel and find TDC with a positive stop. Setup dial indicator on valve and zero indicator with valve closed. Rotate engine until valve is .050" off seat and write down reading on degree wheel. Continue to rotate engine until valve is .050" from closing. Note the number.
To figure lobe center for intake cam subtract opening number from closing number, divide difference by two and add that number to 90. For the exhaust subtract the closing number from the opening number and follow the same formula.
